More Pixel Protocols

LED Pixel Protocol INK1003

Overview

INK1003 has a control circuit that comes in a SOP8 package, allowing for more flexibility with LED choice. It can also be integrated into a 5050 package with built-in LEDs in its INK1002B variant, but with the same protocol.

Specifications

PixLite Mk1

PixLite Mk2

PixLite Mk3

Clock Type

Data-Only 

Color Resolution

Bits 

Current Control

Physical Package

SOP8 

RGB

RBGW

Input Voltage

5V 

Output Pixel Voltage

12V 

PWM Rate

400Hz 

Suitable Camera

Unsuitable for cameras 

Data Transfer Rate

800kbps 

Redundant Data Line

Considerations for Use

Advantages

  • Up to 12V, allowing for long cable lengths

Disadvantages

  • Data-only restricts refresh rates to be limited by the speed of the protocol, which can be slow
  • Low PWM rate makes theses pixels unsuitable for cameras
  • Only 8 bits of data for each color makes dimming curves less smooth
  • No redundancy in data

PixLite Support

Are you looking for INK1003 pixel drivers that work with Art-Net or sACN?

All PixLite Mk3 products support INK1003 as an available Pixel IC type, so get in touch with us to find out how the lighting specialists at Advatek can support you in your pixel lighting project.

A4-S Mk3

PixLite® A4-S Mk3

Driving up to 24 universes of data, and offering easy mounting, sleek design and electrical fault protection — what’s not to love?

E4-S Mk3

PixLite® E4-S Mk3

The E-series LED pixel controller is made for tighter budgets thanks to its ability to drive up to 24 universes of LED pixel control and route power directly to LEDs.

E16-S Mk3

PixLite® E16-S Mk3

The most cost-efficient 16-output commercial grade pixel controller in the world, the E16-S Mk3 drives up to 96 universes of LED pixel control.

T8-S Mk3

PixLite® T8-S Mk3

With a data transmission range of 300 meters, this user-friendly long range pixel controller system is the high-impact solution for professional installations.